In one of the positions the ball will move into the release spot. 5 mo ago (Edited) I know the location from 2013 and up (Disables Door Ajar warning chime IPC 720-01-02 xx0x xxxx) but can't find the solution for 2011.I used a STRATTEC key that was about $10 on eBay. 2) A Windows laptop with Forscan installed. Turn ignition to RUN to exit programming mode. Using a paper clip or awl in the blank hole, push up to release a round spring loaded detent on the key cylinder.
I too am interested in doing some mods to the wife's Escape.FORScan Extended license At least one valid ignition key (master key) that is programmed by PATS, except when all the registered keys are erased from the PATS memory You will need to erase all known keys previously programmed by PATS in your vehicle, as the user won't be able to delete a single key programmed. Have already used Forscan on IPC 720-01-02 but as I suspected, that is only useful to kill the chime when the ignition is on and the door is open.No more irratating ding, ding, ding when my door is open with key in ignition. 720-02-01 xx*x xxxx xxxx Key In Ignition Warning Chime (to disable, subtract 8 from your current value there) If it is an A make it a 2, if it's an E make it a 6, etc.– program the second key in the same way, except that when FORScan asks to insert new key, the first key has to be removed and the second key has to be inserted. Remove the existing key and WITHIN TEN SECONDS, insert a second working key and turn to ON and then back to OFF. Repeat the process again to program the second key.
Forscan key in ignition chime If it doesn't, its the other green/purple striped wire.